MyPower Voice Gateway

The MyPower voice gateway series comprises VG M6000, VG 2000, VG 800 and VG A600. The series supports H.323 standard protocol and SIP protocol compatible with H.323 and SIP standards.

 The MyPower voice gateway series adopt modular design; have several different models, so that end-user can design optimized solution for different networks requirement.

 The MyPower voice gateway series integrate several value-added features, especially the features of Telephone Priority Allocation, Hot-Line Dial, Move with Original Number, Intelligent Routing, Conference Call,

 The product series extends busy-tone scan technology compatible with most companies PBX for least customer investment. When IP network is faulty, it automatically switches to backup network or PSTN network to ensure non-stop service.

MyPower VG M6000
The MyPower VG M6000 is a core-level IP voice gateway, which provides four E1 relay and 96 FXS or 48 FXS+48 FXO It supports conference call function and adopts modularization design, hot-swap, dual-power supply redundancy, and switch without power supply (FXS and E1) with carrier-class reliability applied to IP voice gateway with bigger capability and high reliability.

MyPower VG M6000

MyPower VG 2000
The MyPower VG 2000 is an integrated access IP voice gateway, which provides one-port E1 relay and 48 FXO or 32 FXS. It offers modular design interfaces, smart configuration and convenient network management and provides, E1 relay, FXS and FXO interfaces.

MyPower VG2000

 

MyPower VG 800
The MyPower VG 800 is a terminal IP voice gateway, which provides 16 FXS or 16 FXO).

MyPower VG 800

MyPower VG A600
The MyPower VG A600 is a terminal IP voice gateway, which offers variety of modes. It applies to network terminal access -- specifically desktop access.

MyPower VG A600

 

Key Features

 PSTN reliability    
VG M6000 Supports CARD hot-swap, power supply redundancy backup and E1 port backup
Maipu IP series product (except VG2000) supports the switch without power supply of FXS and FXO ports to guarantee reliable network operation

 PSTN call quality 
 Auto-modulation coding rate
 Voice priority strategy
 Silence compression
 Comfortable noise and echo cancellation
 Dynamic Jitter Buffer adjustment
 Lost packet compensating technology
 Calling quality same as traditional PSTN

 Abundant value-added function
 Call-id         
Call transfer     
 Call forward (no response forward, non-condition forward)   
 Call waiting    
 Hot dial
 Busy tone auto identification
 Port backup
 Network backup
 Second dial-up
 IVR recording
 Group ring
 Call answering
 Direct dial, no extension number
 Powerful IP fax function, supporting standard T.38 protocol
 List feature

 Compatibility   
 Compatible with standard H.323, SIP protocol IP voice gateway, PBX and standard IP voice products of other companies

 Accounting & network management  
 MyPower VG series combine with Maipu integrated service authentication accounting system (Maipu NetSmart) to provide time limitation, called/calling limitation, called query and bill query
 MyPower VCM2000 is Maipu IP voice NMS, which provides the integrated management to IP voice network to finish management of remote configuration (backup, configuration, upgrade), topology (auto network discovery), event (event, warning)
 MyPower VG series combine with Maipu NetSmart, MyPower VCM2000 and MyPower VGK2X IP to construct an integrated, unified and high effective IP voice solution

Entire IP voice solution
 Maipu products such as gateway, gatekeeper, call management server and authentication accounting system easily realize IP voice system without changing most equipment and enable customers to complete smooth system upgrade, ensure original investment and greatly save internal call charge

 Security guarantee mechanism
Supports standard, extended ACL, VLAN, TACACS and RADIUS
 Prevents unauthenticated users from entering the system
 Provide PAP, CHAP authentication and prevents attacks from IP network. 

Technical Specifications

Model item	MyPower VG M6000	MyPower VG2000	MyPower VG 800	MyPower VG A600
Product configuration
10/100M Ethernet interface	2	2	2	2 ~ 5
Console port	1	1	1	1
Service slot	4	4+2	4
System features
Processor	MPC8250 200MHz	MPC860T 50MHz	MPC852T 50MHz	MPC852T 50MHz
Memory	128M	64M	64M	64M
Flash	16M	8M	8M	8M
Phone features
PSTN gateway	FXS, FXO, FXS + FXO, E1	FXO, FXS, E1	FXO, FXS, FXS + FXO
System interface
Analog interface	At most 96-port FXS or 48-port FXO+48 FXS ports	At most 32-port FXS or 48-port FXO ports;	At most 16-port FXS or FXO ports	At most 8-port FXS, 2-port FXO
Digital relay interface	4E1 port, support R2, ISDN PRI signal	1E1 port. Supports China NO.1 ISDN PRI signal	DD	DD
Protocol
Ethernet interface	IEEE 802.2 (LLC), IEEE 802.3 (Ethernet)
E1 interface	ITU-T G.703 (1999)
Signal relay protocol	CAS: Analog CO Trunk, China NO.1                          CCS: ISDN PRI (AT&T Custom, NI-1 and NI-2)		Analog CO Trunk
VoIP key protocol	I SIP, H.323, H.225.0 (RAS and Q.931), H.245, H.235, H.450.x, T38
Voice coding	G.711, G.723, G.729
Routing Protocol	Static Route, RIPv1, RIPv2, OSPF, BGP, DDR, IRMP, SNSP, IGMP
Compressed voice transmission	RTP/RTCP
Management protocol	SNMP
Echo restrain	G.1682000 compliant
Voice activation /comfortable noise	VAD/CNG
Signal check and production	DTMF
Physical index
Dimension (L*W*H)	482.6mm* 312.5mm* 125.6mm	440mm* 300mm* 44.5mm	340mm* 223mm* 44.5mm	216mm* 124mm* 36mm
Power supply requirement
Input voltage (AC)	90~250V	90~250V	90~250V	90~250V
Frequency (Hz)	50~60Hz	50~60Hz	50~60Hz	50~60Hz
Power consumption (W)	<150W	50W	50W	< 18W
Environmental parameters
Temperature	0~40
Humidity	10~90%. Non-condensing

Order Information

Product model	Description
MyPower VG M6000
MyPower VG M6000	Chassis including chassis panel. Supports one core card, three service cards one DSP module and two power supplies
VM6000-4E1MPUH	Core card with 4-port relay interface, one console port, two Ethernet interfaces
VM6000-2E1MPUH	Core card with 2-port E1 relay interface, one console port, and two Ethernet interfaces
VM6000-MPUH	Core card without E1 relay, one console port and two Ethernet interfaces
VM6000-IWFH	H.323-SIP Protocol Interoperability ModuleMaximum Calling Users=600BHCC6000
VM-32FXSH	Service card. 32-port FXS access, supports hot-swap
VM-16S16OH	Service card. 16-port FXS access+16-port FXO access. Supports hot-swap.
VM-1DSP	DSP module combining with core card. Supports 80-port voice channel.
VM-2DSP	DSP module combining with core card. Supports 160-port voice channel.
VM-1DSPA	DSP module combining with core card. Supports 32-port voice channel.
VM6000-MCUH	Call conference card only available for 0 and 1 slots
VM6000-MCU-L30	License Support 30 users
VM6000-MCU-L60	License Support 60 users
VM6000-MCU-L120	License Support 120 users
AD150-1S007W1	AC power supply. The two power supplies back up with each other.
DD150-5S007J1	DC power supply. The two power supplies back up with each other.
MyPower VG 2000
MyPower VG2000	Chassis. Supports two big service cards, four small service cards and three DSP modules.
GM2-16VOP	Big service card. 16-port FXS access
GM2-16VOS	Big service card. 16-port FXO access
GM2-1RE1	Small service card. 1-port E1 relay module. Only can be used in small service slot1.
GM2-4VOS	Small service card. 4-port FXO access
GM2-3DSP	DSP module25ms echo counteracting
GM2-3DSPA	DSP module. Supports 12-port voice channel, G.729 or G.723, and 15ms echo counteracting.  Supports six-port voice channel, G.729 or G.723, and 25ms echo counteracting.
GM2-3DSPB	DSP module. Supports 12-port voice channel, and 64ms echo counteracting.
MyPower VG 800
MyPower VG800	Chassis: Four service cards and 2 DSP modules.
VM800-2DSP	DSP module. Supports 8-port voice channel.
VM800-4DSP	DSP module. Supports 16-port voice channel.
VM800-4VOP	Service card. Four-port FXS access.
VM800-4VOS	Service card. Four-port FXO access.
MyPower VG A600
VG A600-8S1FE1E	Chassis. Eight-port FXS, two Ethernet interfaces, one console port.
VG A600-6S2O1FE1E	Chassis. Six-port FXS, two FXO, two Ethernet interfaces, one console port.
VG A600-4S1O5FE	Chassis. Four-port FXS, One port FXO, 5 Ethernet interfaces, one console port.