VPN MPSec VPN3020B

MPSec VPN3020B VPN Security Gateway

VPN3020B

 Features

Multiple standard encryption and authentication
Identity authentication based on pre-shared encryption key and digital certification
Traversal IPSec NAT
Remote access with dynamic IP address
Dead Peer Detection (DPD) support
Virtual security domain
User group management
Easy-to-deploy and easy configuration
High performance, security and availability
Centralized management based on SNMPv1/v2/v3
Connectivity backup and load balance
Power redundant backup
Virtual Backup Router Protocol (VBRP) for IPsec
Hub & spoke network topology
Auto negotiation
VPN tunnel notification delete
Dynamic Domain Name System (DDNS) support
DHCP over IPsec
IPsec fast-forward engine in software

Specifications

Item	Description
Configuration
Model	Console Port	Service Module Slot	Power Slot	Fan Slot	Control Module Slot
MPSec VPN3020B	1	4	2	1	1
Performance Parameter
Control card type	FM3A-MPU206-2GE
Processor	High-speed MIPS processor
FLASH	16MB by default 80MB expansion
Memory (DDR SDRAM)	128MB DDR266 by default expansion to 1GB DDR266
Communication port	2 x 10M/100M/1000M bps adaptable Ethernet electric port or 2 x 1000M bps Ethernet optical port
Throughput	900Kpps
MTBF (mean time between failures)	100000hours
Encrpytion rate	170M bps
Maximum tunnels	5000 (based on 128MB memory)
Protocol
Network & application protocol	TCP/IP, ICMP, UDP, FTP, PPP/PPPoE, L2TP, MPLS, GRE
Routing protocol	Static routing RIPv1, RIPv2, OSPF, BGP, IRMP, SNSP
Network security	IPsec, IKE, X.509, firewall, NAT, AAA
Supported algorithm	MD5-HMAC, SHA1-HMAC, DES, 3DES, AES128, AES192, AES256
Physical Indices
Dimension HxWxD	100mm x 444mm x 360mm
Weight	12.5KG (full load)
Power Requirements
Input Voltage (AC)	Voltage: 85~265V - Current: 1.2A - Frequency: 50/60Hz
Input Voltage (DC)	Voltage: 38~76V - Current: 1.8A
Power consumption	200W , 15W
Environmental parameters
Short-term operation temperature	0~40
Long-term operation temperature	15~30
Short-term operation relative humidity	10~90%. Non-condensing
Long-term operation relative humidity	40~65%. Non-condensing

Order Information

Model	Description
MPSec VPN3020B	Standard configuration: MPSec VPN3020B chassis (four slots), one fan module (FM3020B-FAN), one power module (AD230-1T004), one control module (FM3A-MPU206-2GE comprising two 1000Mbps Ethernet ports, fixed flash 16M and memory 128M)
FM3020B-MF	MPSec VPN3020B chassis (four service module slots, one control module slot, two power slots and one fan slot)
Fan
FM3020B-FAN	Fan
Control module
FM3A-MPU206-2GE	Control module with high-speed MIPS processor, which includes two fixed 10M/100M/1000M bps adaptable Ethernet electric interfaces and two 1000M bps SFP module slots, 16MB flash, 128MB DDR SDRAM. The SFP module is optional, but electric interface is mutually exclusive with optical interface.
Power module
AD250-1T004	AC power module Two AC power modules can be inserted into MPSec  VPN3020B chassis for power standby
DD250-5T0042	DC power module Two DC power modules can be inserted into MPSec  VPN3020B chassis for power standby
Flash module
FLASH8M-D168-64	8MB flash card (8MB, 168 pins, 64bit)
FLASH16M-D168-64	16MB flash card (16MB, 168 pins, 64bit)
FLASH32M-D168-64	32MB flash card (32MB, 168 pins, 64bit)
FLASH64M-D168-64	64MB flash card (64MB, 168 pins, 64bit)
Memory
DDR266-128M	128M DDR SDRAM. Access speed 266 MHz
DDR266-256M	256M DDR SDRAM. Access speed 266 MHz
DDR266-512M	512M DDR SDRAM. Access speed 266 MHz
Module
FM3A-EN	Hardware encryption module
FM3A-2FE	Two-port 100Mbps ethernet module, which includes two 10M/100Mbps Ethernet electric interfaces and two 100M bps SFP module slots. The SFP module is optional, but electric interfaces are mutually exclusive with optical interface.
SFP-M1-L03P8	The 155M multi-mode optical module (transmission distance: 550m, LC interface, PECL interface level, wavelength: 850nm), adapts to RM3A-1ATM-OC3, RM3A-1POS-OC3, RM3A-1CPOS-OC3, RM3A-2FEH
SFP-S2-L03P3	The 155MB single mode optical module (transmission distance: 20km, LC interface, PECL interface level, wavelength: 1310nm), adapts to RM3A-1ATM-OC3, RM3A-1POS-OC3, RM3A-1CPOS-OC3, RM3A-2FEH
SFP-M2-L24P8	The 1.25GB multi-mode optical module (transmission distance: 2km, LC interface, PECL interface level, wavelength: 850nm), adapt to RM3A-1ATM-OC3, RM3A-1POS-OC3, RM3A-1CPOS-OC3, RM3A-2FEH
SFP-S2-L24P3	1.25GB Single mode optical module (transmission distance: 20km, LC interface, PECL interface level, wavelength: 1310nm), adapts to controller card
Software
IPsec	IPsec software and IPsec chip required.
SNA	SNA software and SNA chip required.
Ipsec + SNA	Software supports IPsec and SNA. A specific chip required.