MPSec VPN3010 VPN Security Gateway
VPN3010E
Features
Multiple standard encryption and authentication
Identity authentication based on pre-shared encryption key and digital certification
Traversal IPsec NAT
Remote access with dynamic IP address
Dead Peer Detection (DPD) support
Easy-to-deploy and easy configuration
High performance, security and availablility
Centralized management based on SNMPv1/v2/v3
Connectivity backup and load balance
Hub & spoke network topology
Auto negotiation
VPN tunnel notification delete
Product Configuration
| Model |
10M/100M Ethernet port |
Configuration serial-port |
MPSec VPN3010 |
4 |
1 |
MPSec VPN3010E |
4 |
1 |
Technical Specifications
| Performance |
Processor |
MPC8245 266MHz |
SDRAM |
Default 0. Optional memory from 64MB to 128MB |
FLASH |
Default 0. Optional memory from 8MB to 72MB |
Throughput |
VPN3010: 35KPPS
VPN3010E: 35KPPS |
Encryption rate |
VPN3010: 15M
VPN3010E: 25M |
Maximum quantity of tunnels |
2000 (SDRAM: 64M)
5000 (SDRAM: 128M) |
Physical index |
Dimension (H X W X D) |
44.5mm x 340mm x 230mm |
Environment parameters |
Environment temperature |
0-40 |
Relative humidity |
0-90%. Non-condensing |
Power supply |
Input voltage (AC) |
90-265V~0.2A 50~60Hz |
Power |
20W |
Standards and protocols |
Network protocol |
TCP/IP, ICMP, UDP, FTP, PPP/PPPoE, L2TP, MPLS, GRE |
Security protocols |
IPsec, IKE, X.509, FireWall, NAT, AAA |
Supported algorithms |
MD5-HMAC, SHAl-HMAC, DES, 3DES, AES128, AES192, AES256 |
Order Information
| Model |
Descriptions |
MPSec VPN3010-AC |
MPSec VPN3010 host,
4-port 10M/100Mbps Ethernet module, one console module not supporting hardware encrypt |
MPSec VPN3010E-AC |
MPSec VPN3010E host,
4-port 10M/100Mbps Ethernet module, one console module supporting hardware encrypt |
FLASH8M-D100-64 |
8MB flash for MPSec VPN3010E-AC |
FLASH16M-D100-64 |
16MB flash for MPSec VPN3010E-AC |
FLASH32M-D100-64 |
32MB flash for MPSec VPN3010E-AC |
FLASH64M-D100-64 |
64MB flash for MPSec VPN3010E-AC |
|
