MP7500 Core Router
The MP7500 series router is a core aggregation router designed and developed on the lines of Advanced Telecom Computing Architecture (ATCA) for efficient large-scale WAN core aggregation and core uplink connection. It provides super large-scale Internet access platform.
The MP7500 router provides two control slots and eight MIM slots. It supports 32-port 155M interface or 256-port E1 interface with 12Mpps throughput. MP7500 incorporates four-core processors based on the technology of dual-core processors. The perfect dual-redundant or multi-redundant design guarantees high reliability of the router.
The MP7500 router adopts MyPower-R software providing routing, backup, network security service, IP multi-cast function QoS, network management function, protocols of network layer and link layer, BGP edge network gateway protocol and MPLS function. It can be used as PE or P node.
MP7500 Core
Key Features
Four-core processing technology
The router adopts advanced multi-core processing technology for separation of data forwarding platform and protocol control platform via distributed processing. It provides load balance of data forwarding platforms. The MP7500 router''s forwarding capability reaches 12Mpps with 32 155M interface and 256E1 interface to satisfy over 2000 2M network aggregation.
Telecom-grade reliability
The router is the first core router based on ATCA providing telecom grade reliability. The router provides independent system management and the multi-core processing technology for separation of data forwarding platform, protocol control platform and system management platform increasing reliability of system operation. It provides dual-redundancy or multi-redundancy design (dual-control, dual-fan, three power supply, double star data bus, double management bus, double Monitor ROM, double memory and double Flash).
Dual-control redundancy & dual-router in single box
The design facilitates dual-router in single box. One dual-control MP7500 is considered as two independent routers. It realizes dual-link redundancy backup and load balance.
320G backboard with distributed & integrated infrastructure
The router provides 40Gbps backboard bandwidth for each slot, which makes the total bandwidth to 320Gbps and realizes the distributed and integrated infrastructure.
Patented virtual routing switching technology
The router supports Maipu patented routing switching technology. WAN interface such as E1 or channels such as CPOS channel can be divided into virtual Ethernet ports, and the number of channels of single reaches to 252. This provides service hardware isolation and bandwidth guarantee.
Low power consumption & stable operation
The power consumption by router is lower than 400w. The router offers stable operation of high-end equipment.
LCD screen and alarming maintenance
The router provides LCD screen at the top, which displays system temperature, CPU usage and memory occupancy. By using shortcut keys beside LCD, the control card, line card and interface status can be checked.
IPV6 protocol & software functions
The router supports IPV6 protocol, BGP, MPLS and L2TP which can be used for deploying Layer 2 and Layer 3 VPNs. The features include ACL package-filtering, NAT, authentication audit, routing check, callback and service protect refuse. It provides integrated service and division service, supports RSVP, CAR, FIFO, PQ, FQ, CBWFQ, LLQ, SHELL, WEB, SNMP (SNMP V3 protocol). The Maipu Masterplan platform performs network configuration, network monitor, statistic, accounting and maintenance.
Radiation system design
The router provides standard 14U screen electromagnetic radiant chassis, which can be deployed on standard rack with features of anti-shake, anti-high and low temperature and anti-electromagnetic radiation. It provides 200W radiation capability based on ATCA and three power supply interfaces for 1+1 and 2+1 power supply redundancy backup. It supports hot-swap guaranteeing reliability and maintenance.
Technical Specifications
Item |
MP7500 |
Product configuration |
MIM |
8 |
Control slot |
2 |
Power supply slot |
3 |
Fan slot |
2 |
Performance |
Processor |
High performance multi-core processor |
Memory |
Fixed 64Mbytes extending to 1Gbytes via CF |
Memory (DDR SDRAM) |
512Mbytes by default extending to 1Gbytes |
Throughput |
12Mpps |
Average non-malfunction time |
100000h |
Bus bandwidth |
320Gbps |
Maximum routing table capacity |
440K (memory is 1Gbyte) |
Maximum ACL
number |
50K (memory is 1Gbyte) |
Standards & protocols |
Link protocol |
PPP, FR, HDLC, Ethernet_II, Ethernet_SNAP, 802.1Q |
Network protocol |
IPV6, TCP/IP, ICMP, UDP, FTP, TFTP, SNMP, TELNET, RLOGIN, DHCP, HTTP, DNS, ARP, IPv6 |
Routing protocol |
Static routing, RIPv1, RIPv2, OSPF, BGP, DDR, IGMP, DVMRP, PIM-SM/DM, IS-IS |
Network security |
PPP encryption, L2TP, GRE, policy routing, AAA, MPLS L2/L3VPN, SSH, SNMP V3 |
QoS |
FIFO, PQ, FQ, WFQ, CBWFQ, LLQ, RSVP, CAR, SPD, traffic-shaping |
Physical index |
Dimension |
576 mm x 482.6 mm x 420mm |
Weight |
50Kg (full slot) |
Power supply requirement |
Input voltage (AC) |
Voltage: 100~240V
Current: 1.2A
Frequency: 50~60Hz |
Single power |
350W |
Power (maximum) |
3x350W |
Input voltage (DC) |
Voltage: -40~-57V
Current: 4.6A |
Single power |
350W |
Power (maximum) |
3x350W |
Environment |
Short-term working temperature |
0~40 |
Long-term working temperature |
15~30 |
Short-term humidity |
10~90%. Non-condensing |
Long-term humidity |
40~65%. Non-condensing |
Order Information
Product model |
Description |
Chassis |
MP7508-MF |
Core aggregation router chassis, eight service module slots, two fan slots, three power supply slots and LCD screen. |
Control module |
RM7B-MPU408-4GEH |
Control module for MP7500, four fixed 10/100/1000M adaptive Ethernet
electric interfaces and four 1000M SFP optical module jack. These two
interfaces cannot be used at the same time. Fixed 64Mbytes FLASH,
one CF card slot extending to 1Gbytes via CF. Two memory slots |
Fan module |
RM7508-FANH |
Fan module (we suggest adopting dual-fan for backup) |
Power supply module |
DD400-5S005A |
DC power supply module (backup supports 1+1 or 2+1 solution, 2+1
Backup is adopted for 4 line card) |
AD400-1S005V |
AC power supply module (backup supports 1+1 or 2+1 solution, 2+1
Backup is adopted for 4 line card) |
Memory |
DDR667-512S |
Rate is PC667, capability is 512Mbytes, encapsulation is SODIMM200 DDR2 memory |
Service module |
RM7B-4CPOS-OC3H |
MP7500: 4-port 155M CPOS module, 100M SFP module |
RM7B-2CPOS-OC3H |
MP7500: 2-port 155M CPOS module, 100M SFP module |
RM7B-1CPOS-OC3H |
MP7500: 1-port 155M CPOS module, 100M SFP module |
RM7B-4ATM-OC3H |
MP7500: 4-port 155M ATM module, 100M SFP module |
RM7B-2ATM-OC3H |
MP7500: 2-port 155M ATM module, 100M SFP module |
RM7B-1ATM-OC3H |
MP7500: 1-port 155M ATM module, 100M SFP module |
RM7B-32CE1H |
MP7500: 32-port CE1 module |
RM7B-16CE1H |
MP7500: 16-port CE1 module |
RM7B-8CE1H |
MP7500: 8-port CE1 module |
RM7B-32E1H |
MP7500: 32-port E1 module |
RM7B-16E1H |
MP7500: 16-port E1 module |
RM7B-8E1H |
MP7500: 8-port E1 module |
RM7B-2GEH |
Two 1000M Ethernet SFP interface module (you can choose optical or electric module) |
Optical module |
SFP-S2-L03P3 |
155M single optical module (transmission distance: 20km, LC interface,
PECL, wave length 1310nm), suitable for RM7B-1/2/4ATM-OC3H,
RM7B-1/2/4CPOS-OC3H |
SFP-M2-L03P8 |
155M multi-module optical module (transmission distance: 2km, LC interface, PECL, wave length: 850nm), suitable for RM7B-1/2/4ATM-OC3H, RM7B-1/2/4CPOS-OC3H |
SFP-S2-L24P3 |
1.25G single optical module (transmission distance: 2km, LC interface, PECL, wave length: 1310nm), suitable for RM7B-2GEH module |
SFP-M1-L24P8 |
1.25G multi-module optical module (transmission distance: 550m, LC interface, PECL, wave length: 850nm), suitable for control card module, RM7B-2GEH |
|
|
